Access Denied
IMPORTANT! If you're a store owner, please make sure you have Customer accounts enabled in your Store Admin, if you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
Common Errors
Common Errors
First choose your display
Brose Allround, Center & Remote
Just Comfort & Kodiak / Classik Display
QWIC Cycling
Error messages Brose service tool + display: Allround, Center & Remote
Error 0
Error 1
Error 2
Error 3
Error 4
Error 5
Error 8
Error 9
Error 10
Error 11
Error 12
Error 13
Error 14
Error 15
Error 16
Error 17
Error 18
Error 19
Error 20
Error 21
Error 22
Error 23
Error 24
Error 25
Error 26
Error 27
Error 28
Error 29
Error 30
Error 31
Error 32
Error 33
Error 34
Error 35
Error 36
Error 37
Error 38
Error 39
Error 40
Error 41
Error 42
Error 43
Error 44
Error 45
Error 46
Error 47
Error 48
NOBATTERY
NEED DISPLAY
TDA
Error 0 - Drive Unit - Peak Current
Peak current detected in the motor. Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, go to a certified dealer.
Error 1 - Drive Unit - Peak Current
Peak current detected in the motor. Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, go to a certified dealer.
Error 2 - Battery - Low voltage
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, go to a certified dealer.
Error 3 - Battery - Peak voltage
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, go to a certified dealer.
Error 4 - Drive Unit - Error in the electric motor
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, go to a certified dealer.
Error 5 - Drive Unit - Incorrect motor parameter
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, go to a certified dealer.
Error 8 - Drive Unit - No speed signal detected
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, go to a certified dealer.
Error 9 - Drive Unit - Software error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, go to a certified dealer.
Error 10 - Drive Unit - Software error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, go to a certified dealer.
Error 11 - Drive Unit - Error in lighting system
Check the wiring around your lights. If the problem persists, make an appointment at a certified dealer.
Error 12 - Drive Unit - Error in the electrical measurement
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 13 - Drive Unit - Error in the torque sensor
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 14 - Drive Unit - Cadence sensor error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 15 - Drive Unit - Cadence sensor error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 16 - Drive Unit - Peak Current Display
Check the wiring around the display. If the problem persists, make an appointment at a certified dealer.
Error 17 - Drive Unit - Temperature sensor error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 18 - Drive Unit - Temperature sensor error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 19 - Drive Unit - Over Temperature
Let the Drive Unit cool down. Reduce the load on the motor by pedaling less or by lowering the assist position. Restart the E-Bike system. If the problem persists, make an appointment at a certified dealer.
Error 20 - Display - Communication error
Check the wiring around the display. If the problem persists, make an appointment at a certified dealer.
Error 21 - Drive Unit - Under-voltage
Make an appointment with a certified dealer.
Error 22 - Drive Unit - Motor current measurement error
Disconnect and reconnect the battery. If the problem persists, make an appointment at a certified dealer.
Error 23 - Drive Unit - Short circuit in motor
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 24 - Drive Unit - Error in the torque sensor
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 25 - Drive Unit - Error in the torque sensor
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 26 - Drive Unit - Sensor error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 27 - Display - Communication error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 28 - Drive Unit - Incorrect motor parameter
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 29 - Drive Unit - Hard shutdowns
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 30 - Battery - The battery is almost/completely discharged
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 31 - Drive Unit - Motor blocked
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 32 - Drive Unit - Severe System Error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 33 - Drive Unit - Severe System Error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 34 - Drive Unit - Error in the Torque sensor
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 35 - Drive Unit - Error in the Torque sensor
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 36 - Drive Unit - Error in the Torque sensor
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 37 - Drive Unit - Peak Current Detected
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 38 - Drive Unit - Brake light failure
Make an appointment with a certified dealer.
Error 39 - Drive Unit - Incorrect motor parameter
Make an appointment with a certified dealer.
Error 40 - Drive Unit - Incorrect motor behavior
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 41 - Battery - Low battery level
Low battery level. Charge the battery.
Error 42 - Drive Unit - No external speed signal detected
Make an appointment with a certified dealer.
Error 42 - Drive Unit - No external speed signal detected
Make an appointment with a certified dealer.
Error 43 - Drive Unit - External speed signal unlikely
Make an appointment with a certified dealer.
Error 44 - Drive Unit - Manipulation Detected
Make an appointment with a certified dealer.
Error 45 - Drive Unit - Gear ratio outside the value range
Make an appointment with a certified dealer.
Error 47 - Drive Unit - Gear ratio outside the value range
Make an appointment with a certified dealer.
Error 48 - Drive Unit - Belt drive
Make an appointment with a certified dealer.
Error NOBATTERY - Battery - No battery connection
Disconnect and reconnect the battery. If the problem persists, make an appointment at a certified dealer.
Error NODISPLAY - Display - No display connection
Check the wiring around the display. If the problem persists, make an appointment at a certified dealer.
Error TDA - Battery - Temperature Discharge Error
The battery temperature is too high. Bring the battery to an operating temperature between 0-40°C (32°F - 104°F).
Error messages for the Just Comfort & Kodiak / Classik Display
Error 10
Error 11
Error 12
Error 20
Error 21
Error 23
Error 24
Error 25
Error 26
Error 30
Error 31
Error 40
Error 41
Error 42
Error 43
Error 44
Error 45
Error 46
Error 60
Error 70
Error 71
Error 72
Error 73
Error 80
Error 81
Error 82
Error 83
Error 84
Error 310
Error SCOOP
SCOOP REBOOT
SCOOP READY
Error 10 - Battery - Low battery voltage
Charge the battery with the original battery charger. If the problem persists, make an appointment at a certified dealer
Error 11 - Battery - Battery overvoltage
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 12 - Battery - The battery is almost/completely discharged
Charge the battery with the original battery charger.
Error 20 - Drive Unit - Electrical measurement error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 21 - Battery - Error in the temperature sensor
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 23 - Battery - Error in the temperature sensor
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 24 - Drive Unit - Undervoltage
Check if the battery is charged. Disconnect and reconnect the battery. Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, please make an appointment with a certified dealer.
Error 25 - Drive Unit - Motor current measurement error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 26 - Drive Unit - Hard System Shutdowns
Make an appointment with eand certified dealer.
Error 30 - Drive Unit - Error in walk assist
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 31 - Drive Unit - Lighting voltage failure or short circuit
Check the wiring around the display. If the problem persists, make an appointment at a certified dealer.
Error 40 - Drive Unit - Peak Current
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 41 - Drive Unit - Peak Current
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 42 - Drive Unit - Electric Motor Malfunction
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 43 - Drive Unit - Motor short circuit
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 44 - Drive Unit - Overtemperature
Let the Drive Unit cool down. Reduce the load on the motor by pedaling less or by lowering the assist position. Restart the E-Bike system. If the problem persists, make an appointment at a certified dealer.
Error 45 - Drive Unit - Sensor error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 46 - Drive Unit - Motor blocked
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 60 - Display - Communication error
Check the wiring around the display. If the problem persists, make an appointment with eand certified dealer.
Error 70 - Drive Unit - Torque sensor error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 71 - Drive Unit - Error in cadence sensor
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 72 - Drive Unit - Torque sensor error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 73 - Drive Unit - Torque sensor error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 80 - Drive Unit - Incorrect motor parameter
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 81 - Drive Unit - No speed signal detected
Check the position of the spoke sensor. Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 82 - Drive Unit - Software Error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 83 - Drive Unit - Error in the program sequence
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 84 - Drive Unit - Incorrect motor parameter
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error 310 - Display - Voltage interruption
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
Error SCOOP - Display/Motor - Error in Push Assist
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
SCOOP REBOOT- Display/Motor - Push Assist Error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
SCOOP READY - Display/Motor - Push Assist Error
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
QWIC error messages
Error 81
Error 119
Error 200
Error 201
Error 202
Error 203
Error 204
Error 205
Error 208
Error 209
Error 210
Error 211
Error 212
Error 213
Error 214
Error 215
Error 216
Error 217
Error 218
Error 219
Error 220
Error 221
Error 222
Error 223
Error 224
Error 225
Error 226
Error 227
Error 228
Error 229
Error 230
Error 231
Error 232
Error 233
Error 234
Error 235
Error 236
Error 237
Error 238
Error 239
Error 240
Error 241
Error 242
Error 243
Error 244
Error 245
Error 246
Error 247
Error 248
NOBATTERY
NEED DISPLAY
TDA
ERROR 81 - Display/Battery - Communication failure
Restart the E-bike system. Make sure to turn off the system completely. If the problem persists, make an appointment at a certified dealer.
ERROR 119 - Collection code
An error has occurred in the Brose system. Restart the E-bike system. Make sure to turn the system off completely. If the problem persists, then make an appointment with a certified dealer to have the bicycle read out via the service tool.
invalid password
Enter