Access Denied
IMPORTANT! If you're a store owner, please make sure you have Customer accounts enabled in your Store Admin, if you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
Drive-S: Mountaineers
Enjoy your mobility. On the way to work, to do some shopping or to explore our city.
Find a dealerWe are constantly on the move
The powerful Brose Drive S mid-motors are just the right partners for sporty e-bike riders. A particularly sensitive response enables top performance on demanding trails. The magnesium mid-mounted motor with 410 percent maximum support brings most of the family's power to the pedals. Thanks to the exclusive 'Flex Power Mode' assistance level, the Brose Drive S Mag delivers an even more lively driving experience.
Brose Drive S Aluminum
Benefits
✓ Very quiet, little vibration
✓ No pedaling resistance when the mid-motor is switched off
✓ Sensitive reaction
✓ Powerful support and harmonious handling
✓ Excellent power-to-weight ratio
✓ Flexible frame integration for maximum design freedom
✓ Adaptation of the drive configuration to the type of e-bike and customer specification
| Part number | C97272-xxx |
|---|---|
| Engine type | Brushless Internal Rotor |
| Weight | 3,400 g |
| Dimensions L/H/W | 213mm × 128mm × 98mm (Casing Width) 213mm × 128mm × 150mm (Axis width) |
| Nominal spanning | 36 V |
| Continuous Rated Power | 250 W |
| Couple | 90 Nm |
| Maximum support | 380% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2,4 A × 6 V = 14,4 W Rear lamp 0,1 A × 6 V = 0,6 W |
| Protection against ingress (seal) | IP56 |
Brose Drive S Alu Remanufactured
Want to know more about remanufactured?Benefits
✓ Very quiet, little vibration
✓ No pedaling resistance when the mid-motor is switched off
✓ Sensitive reaction
✓ Powerful support and harmonious handling
✓ Excellent power-to-weight ratio
✓ Flexible frame integration for maximum design freedom
✓ Adaptation of the drive configuration to the type of e-bike and customer specification
| Part number | G74102-xxx |
|---|---|
| Engine type | Brushless Internal Rotor |
| Weight | 3,400 g |
| Dimensions L/H/W | 213mm × 128mm × 98mm (Casing Width) 213mm × 128mm × 150mm (Axis width) |
| Nominal spanning | 36 V |
| Continuous Rated Power | 250 W |
| Couple | 90 Nm |
| Maximum support | 380% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2,4 A × 6 V = 14,4 W Rear lamp 0,1 A × 6 V = 0,6 W |
| Protection against ingress (seal) | IP56 |
Brose Drive S Mag Vertically Remanufactured
Benefits
✓ Very quiet, little vibration
✓ No pedaling resistance when the mid-motor is switched off
✓ Sensitive reaction
✓ Powerful support and harmonious handling
✓ Exclusive with Flex Power Mode
✓ Excellent power-to-weight ratio
✓ Flexible frame integration for maximum design freedom
✓ Adaptation of the drive configuration to the type of e-bike and customer specification
| Part number | E01680-xxx |
|---|---|
| Engine type | Brushless Internal Rotor |
| Weight | 2,900 g |
| Dimensions L/H/W | 198mm × 137mm × 99mm (Casing Width) 198mm × 137mm × 150mm (Axis width) |
| Nominal spanning | 36 V |
| Continuous Rated Power | 250 W |
| Couple | 90 Nm |
| Maximum support | 380% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlight 2A × 12V = 24W Rear lamp 0,2A × 12V = 2,4W |
| Protection against ingress (seal) | IP56 |
Brose Drive S Mag Vertically Remanufactured
Want to know more about remanufactured?Benefits
✓ Very quiet, little vibration
✓ No pedaling resistance when the mid-motor is switched off
✓ Sensitive reaction
✓ Powerful support and harmonious handling
✓ Exclusive with Flex Power Mode
✓ Excellent power-to-weight ratio
✓ Flexible frame integration for maximum design freedom
✓ Adaptation of the drive configuration to the type of e-bike and customer specification
| Part number | G74106-xxx |
|---|---|
| Engine type | Brushless Internal Rotor |
| Weight | 2,900 g |
| Dimensions L/H/W | 198mm × 137mm × 99mm (Casing Width) 198mm × 137mm × 150mm (Axis width) |
| Nominal spanning | 36 V |
| Continuous Rated Power | 250 W |
| Couple | 90 Nm |
| Maximum support | 380% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlight 2A × 12V = 24W Rear lamp 0,2A × 12V = 2,4W |
| Protection against ingress (seal) | IP56 |
Brose Drive S Mag Horizontal
Benefits
✓ Very quiet, little vibration
✓ No pedaling resistance when the mid-motor is switched off
✓ Sensitive reaction
✓ Powerful support and harmonious handling
✓ Exclusive with Flex Power Mode
✓ Excellent power-to-weight ratio
✓ Flexible frame integration for maximum design freedom
✓ Adaptation of the drive configuration to the type of e-bike and customer specification
| Part number | E57028-xxx |
|---|---|
| Engine type | Brushless Internal Rotor |
| Weight | 2,900 g |
| Dimensions L/H/W | 198mm × 137mm × 99mm (Casing Width) 198mm × 137mm × 150mm (Axis width) |
| Nominal spanning | 36 V |
| Continuous Rated Power | 250 W |
| Couple | 90 Nm |
| Maximum support | 380% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2 A × 12 V = 24 W Rear lamp 0,2 A × 12 V = 2,4 W |
| Protection against ingress (seal) | IP56 |
Brose Drive S Mag Horizontally Remanufactured
Want to know more about Remanufactured?Benefits
✓ Very quiet, little vibration
✓ No pedaling resistance when the mid-motor is switched off
✓ Sensitive reaction
✓ Powerful support and harmonious handling
✓ Exclusive with Flex Power Mode
✓ Excellent power-to-weight ratio
✓ Flexible frame integration for maximum design freedom
✓ Adaptation of the drive configuration to the type of e-bike and customer specification
| Part number | G74105-xxx |
|---|---|
| Engine type | Brushless Internal Rotor |
| Weight | 2,900 g |
| Dimensions L/H/W | 198mm × 137mm × 99mm (Casing Width) 198mm × 137mm × 150mm (Axis width) |
| Nominal spanning | 36 V |
| Continuous Rated Power | 250 W |
| Couple | 90 Nm |
| Maximum support | 380% |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2 A × 12 V = 24 W Rear lamp 0,2 A × 12 V = 2,4 W |
| Protection against ingress (seal) | IP56 |
Find an authorized Brose dealer
The authorized Brose dealers share our vision of quality and service to ensure you get the quality service you deserve. From simple software update to complex technical solution. However, should the error not be resolved, the dealer will send an online ticket to the Brose service team and you will be back on tour with the usual Brose driving experience.
Find a dealerinvalid password
Enter