Access Denied
IMPORTANT! If you're a store owner, please make sure you have Customer accounts enabled in your Store Admin, if you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
/
Description
This kit allows the belt replacement to be performed on a Brose e-bike mid-motor with an aluminium housing:
Aluminum Drive
- C16162-xxx
- C79232-xxx
- C91143-xxx
- C97272-xxx
- C97292-xxx
- E22243-xxx
- G61340-xxx
- G74099-xxx
- G74102-xxx
This kit contains the following parts:
- seal
- belt
- gasket
- 1x allen screw --> Max 0.2Nm
- 3x Torx T25x22
- 2x Torx T25 x80
- security label
- O-ring
Not sure if the belt is broken? This is what an engine with a belt on and/or broken sounds like:
Recommendation:
A belt replacement kit case, with all usable parts to replace a belt (alu and mag).
- 0.2Nm Torque Wrench - for tightening the belt tensioner adjusting screw to the correct torque.
- Loctite 222 - for the screw locking of the adjusting screw
-
Super B TB-1069 - Spidertool front sprocket Brose
- contactspay - for cleaning the contacts
- Acid-free Vaseline, you must apply this to the belt
- Loctite 7063 - recommendable, but optional; for cleaning the set screw for optimum adhesion of the threadlocker
You can also have the belt replaced by us, there are additional costs involved. Would you like more information about this? You can find these in our knowledge base, under the header"Mounting kit".
/
You may also like
Recently viewed
invalid password
Enter