Description
| Part number | G74104-xxx |
|---|---|
| To replace engine | E01680-xxx |
| Engine type | Brushless Internal Rotor |
| Weight | 2,900 gr |
| Dimensions L/H/W | 198mm × 137mm × 99mm (Casing Width) 198mm × 137mm × 150mm (Axis width) |
| Nominal spanning |
36 V |
| Continuous Rated Power | 250 W |
| Torque | 90 Nm |
| Maximum support | 380 % |
| Support up to | 25 km/h |
| Walking support up to | 6 km/h |
| Light source | Headlamp 2 A × 12 V = 24 W Rear lamp 0,2 A × 12 V = 2,4 W |
| Protection against ingress (seal) | IP56K |
| Guarantee | 24 months |
| Manufacturer 2026+ |
Yamaha Motor eBike Systems GmbH (YMESG) |
| Manufacturer until 2026 |
Brose Antriebstechnik GmbH & Co. KG |
| Included |
|
| BMZ TOOL | No model installation possible with BMZ Service tool yet. Exchange via service partner is necessary! status: 1-3-2025 |
Remanufactured Drive unit!
Renewed parts : Reman-Drive transforms previously used components into fully functional products, thereby offering a cost-effective solution for customers, while quality and performance remain unmatched.
Improved quality measures: "Reman-Drive" makes
using meticulous, tailor-made disassembly, cleaning and testing procedures to maintain the same high standards as new units.
A direct contribution to the environment: "Reman-Drive significantly reduces CO2 emissions (min. 21 kg per unit) and waste, thereby making an immediate positive contribution to the environment.
Key facts:
+ Remanufacturing uses the existing production line. Maintaining a high quality standard.
+ Reman drive costs less than a new engine
+ All parts are processed, cleaned and tested internally
+ Reman-Drive is a separate product that can be used as a replacement or as a new functioning engine.
+ 2 years manufacturer's warranty
+ Reman is sold as new and with virtually no kilometers driven* in the engine.
*There will always be some kilometers driven on the motorcycle due to testing.
+ Remanufacturing of the engines prevents 240 tons of additional carbon emissions per year.
+ Old engines will be collected as standard in order to be put back into the recycling program and put on the market as Remanufactured.
You can find more information about Remanufactured here.
Component exchange
The component exchange is included with the purchase of a new mid-drive motor.
We need the old engine to prepare the new one.
After your order we will provide you with a form to provide us with the correct information so that we can prepare the new one. Once completed, you will receive a shipping label to collect the old engine and we will return the new engine as soon as possible.
The old motor will be placed back into the recycling process by default, for both ecological and economic reasons. If you would like the old motor returned, you can indicate this when shipping the old motor; however, we will charge extra costs for this due to, among other things, the weight.