BROSE display Allround - E41230 | G59389

The name says it all - the elegant Brose Display Allround is a stylish all-in-one solution for every motorcycle. The six buttons are embossed for a secure feel and ergonomically placed for quick and easy access to all functions. All functions are displayed on a 1,5-inch convex screen.

Important!

The display does not have a mini USB connection, an update is performed via the service adapter. The display uses the Higo standard (purple) as the connection plug. Depending on the previous display, you may need a completely new cable to the motor or an adapter cable (see photos and accessories).

If necessary, check whether you have an internal or external wake up line.

• Replacement display cable with external wake up
•  Footnotes:   drive units  C16162 en C91143-100 have no internal wake up. The C97272-100 was released in variants with and without internal wake-up
• Replacement display cable with internal wake up
• All Magnesium drive units and models ending with -200, have internal wake up

Do you want to replace the display of a QWIC bicycle? 

Then you must also install a new display cable, because the display cable for the QWIC display is connected differently and thus puts voltage on the wrong pins for the all-round display to function. Internal wake up or external wake up is not important.

notes: After replacing the display and cable, the lighting (if present) on the head tube will no longer function. Since it is also connected to the QWIC display cable

 Other bimportant information!

Unfortunately, not all bikes on the market are compatible with this display.

Experience to date shows:

• all bikes with Drive-S (C97272, E06855 and E01680) motors, should have a battery where the display works (not Specialized)
• all bicycles with a Mag motors, should have a battery where the display works (not Specialized)
• Batteries from Joycube (installed in Fischer wheels) type JCEB360-14-N also work
  
• Linkage battery with the following part numbers should work: AST-09-35S

• BMZ batteries with the following part numbers should work: 27345-01 (partial, depending on firmware), 27345-05, 27345-06, 27345-11, 27345-12, 27345-16, 27345-23, 30900-01, 30900-03, 30900-04, 30900-11, 37146-00, 37146-04, 37146-05
  

• All bicycles where you can only switch on the bicycle at the battery and not at the display, usually don't work

• BMZ batteries with the following part numbers do not work:

• 23251, 23251-1, 23252, 23252-01, 23257, 23258, 26260-00, 23629, 23945, 23945-1, 23945-2, 23945-3, 23945-4, 23945-05, 23945 -06, 23945- 07, 24246-1, 24246-3, 24246-05, 25611, 25611-1 25611-2 25611-3, 25611-4, 25611-05, 25611-07, 25611-22, 27237-00, 27238-00, 27239-00, 27239-03, 27239-04, 27239-27239, 1, 27239-02, 27239-03, 27285-27285, 1, 27345-27345, 00, 27345-01, 27345-02, 27345-03, 28460 00-28460, 01-28581, 00-28581, 01-28588, 00-25588, 01-29844, 00-30798, 01-30799, 01-XNUMX, XNUMX-XNUMX