Drive-H: Cargo

We are constantly on the move

The powerful Brose Drive H mid-engines are just the right partners for the cargo bikes. A particularly sensitive response enables top performance on demanding trails. The magnesium mid-motor with 410 percent maximum assist puts most of the family's power to the pedals. 

Brose Drive H Mag VerticalBrose Drive H Mag Horizontal

Brose Drive H Mag Vertical

Benefits
✓ Very quiet, little vibration
✓ No pedaling resistance when the mid-motor is switched off
✓ Sensitive reaction
✓ Powerful support and harmonious handling
✓ Perfect for cargo bikes up to a combined weight of 250 kg
✓ Excellent power-to-weight ratio
✓ Flexible frame integration for maximum design freedom
✓ Adaptation of the drive configuration to the type of e-bike and customer specification 

Part number	G57093-xxx
Engine type	Brushless Internal Rotor
Weight	2,900 g
Dimensions L/H/W	198mm × 137mm × 99mm (Casing Width) 198mm × 137mm × 150mm (Axis width)
Nominal spanning	36 V
Continuous Rated Power	250 W
Couple	90 Nm
Maximum support	410%
Support up to	25 km/h
Walking support up to	6 km/h
Light source	Headlight 2A × 12V = 24W Rear lamp 0,2A × 12V = 2,4W
Protection against ingress (seal)	IP56
max. System weight	250 kg
Disclaimer	Details can still be optimized, therefore these are preliminary figures.

Brose Drive H Mag Horizontal

Benefits
✓ Very quiet, little vibration
✓ No pedaling resistance when the mid-motor is switched off
✓ Sensitive reaction
✓ Powerful support and harmonious handling
✓ Perfect for cargo bikes up to a combined weight of 250 kg 
✓ Excellent power-to-weight ratio
✓ Flexible frame integration for maximum design freedom
✓ Adaptation of the drive configuration to the type of e-bike and customer specification 

Part number	G57094-xxx
Engine type	Brushless Internal Rotor
Weight	2,900 g
Dimensions L/H/W	198mm × 137mm × 99mm (Casing Width) 198mm × 137mm × 150mm (Axis width)
Nominal spanning	36 V
Continuous Rated Power	250 W
Couple	90 Nm
Maximum support	410%
Support up to	25 km/h
Walking support up to	6 km/h
Light source	Headlight 2A × 12V = 24W Rear lamp 0,2A × 12V = 2,4W
Protection against ingress (seal)	IP56
max. System weight	250 kg
Disclaimer	Details can still be optimized, therefore these are preliminary figures.

Find an authorized Brose dealer

The authorized Brose dealers share our vision of quality and service to ensure you get the quality service you deserve. From simple software update to complex technical solution. However, should the error not be resolved, the dealer will send an online ticket to the Brose service team and you will be back on tour with the usual Brose driving experience.