Brose belt service kit for Alu Drive - E00064

This kit allows the belt replacement to be performed on a Brose e-bike mid-motor with an aluminium housing:

Aluminum Drive 

• C16162-xxx
• C79232-xxx
• C91143-xxx
• C97272-xxx
• C97292-xxx
• E22243-xxx
• G61340-xxx
• G74099-xxx
• G74102-xxx
  

 This kit contains the following parts:

• seal
• belt
• gasket
• 1x allen screw --> Max 0.2Nm
• 3x Torx T25x22
• 2x Torx T25 x80
• security label
• O-ring

 

Not sure if the belt is broken? This is what an engine with a belt on and/or broken sounds like:

Recommendation:

A belt replacement kit case, with all usable parts to replace a belt (alu and mag).

• 0.2Nm Torque Wrench - for tightening the belt tensioner adjusting screw to the correct torque. 
• Loctite 222 - for the screw locking of the adjusting screw
• Super B TB-1069 - Spidertool front sprocket Brose
  
• contactspay - for cleaning the contacts 
• Acid-free Vaseline, you must apply this to the belt
  

 

You can also have the belt replaced by us, there are additional costs involved. Would you like more information about this? You can find these in our knowledge base, under the header"Mounting kit".